EARTHMOVING EQUIPMENT::
BACKHOE-26HP-DIESEL

Where to find BACKHOE-26HP-DIESEL in Raleigh

Image for reference only
Actual item may look different
Click on image for larger view

4 Hour: $130.00
Daily: $205.00
Weekly: $640.00
Comments:
  • MODEL: B26
  • Model Name B26TLB
  • ENGINE
  • Make Kubota
  • Model D1105
  • Type Diesel
  • EPA Rating Interim Tier IV (s/n 52091 ~)
  • Cooling Liquid
  • Number of cycles 4
  • Aspiration Natural
  • Cylinders 3
  • Bore and stroke 3.1 x 3.1 in. (78 mm x 78.4 mm)
  • Displacement 68.5 cu. in. (1123 cc)
  • Horsepower
  • Engine gross @ rpm 24.3 HP (18.1 kW) @ 2800 RPM
  • Engine net @ rpm 23.1 HP (17.2 kW) @ 2800 RPM
  • PTO @ rpm 19.5 HP (14.5 kW) @ 2800 RPM
  • Injection pump Inline, piston type
  • Self bleed fuel system Yes
  • Fuel shutoff Key switch activated engine stop mechanism
  • Governor Weight type governor
  • Lubrication Forced lubrication
  • Cooling system Liquid cooled w/pressurized radiator
  • Radiator fan Radial air flow
  • Cold weather start aid Glow plugs
  • Exhaust/muffler Enclosed with spark arrestor
  • Throttle location (s) Hand control, right side-mounted for loader and or backhoe operation
  • Air filter Dual paper element
  • Oil filter Spin on cartridge
  • COOLING SYSTEM
  • Type Liquid cooled w/pressurized radiator
  • Air flow type Radial air flow
  • Radiator screens Standard
  • FUEL SYSTEM
  • Fuel filter Replaceable cartridge
  • FLUID CAPACITIES
  • Fuel tank capacity 8.2 gal. (31 l)
  • Cooling system capacity (4.5 l)
  • Engine lubricant oil capacity (3.0 l)
  • Transmission oil capacity (26 l)
  • Front axle housing (4.7 l)
  • CHASSIS, AXLE AND BRAKES
  • Steering type Hydrostatic power steering
  • Front axle type Bevel gear type, 4WD
  • Differential lock - Rear axle Standard
  • Final drive Spur gear
  • Brake type Wet disc
  • Parking brake Parking brake on master brake pedal
  • DRIVE TRAIN/TRANSMISSION
  • Transmission type Hydrostatic
  • Number of ranges 3
  • Clutch N/A
  • TRAVELING SPEEDS (WITH STANDARD TIRES)
  • Maximum traveling speed
  • Forward 11.1 mph (17.8 km/h)
  • Reverse 9.8 mph (15.8 km/h)
  • Low range
  • Forward 2.8 mph (4.5 km/h)
  • Reverse 2.5 mph (4.0 km/h)
  • Medium range
  • Forward 5.2 mph (8.4 km/h)
  • Reverse 4.6 mph (7.4 km/h)
  • High range
  • Forward 11.1 mph (17.8 km/h)
  • Reverse 9.8 mph (15.8 km/h)
  • POWER TAKE OFF (PTO)
  • PTO system Hydraulic, independent
  • Rear PTO Standard
  • Rear PTO speed 540 @ 2768 rpm
  • Mid-PTO Not available
  • PTO shield Flip-up type
  • HYDRAULIC SYSTEM
  • Implement pump 7.0 gpm (26.3 l/min)
  • Power steering pump 4.2 gpm (16.0 l/min)
  • Total hydraulic flow 11.2 gpm (42.3 l/min)
  • Loader valve Standard
  • Loader 3rd function Optional
  • Rear remote valves Optional, max. 2
  • Backhoe service port Standard on BT820V model
  • 3-Point hitch Optional
  • Position control Position control
  • Lift capacity
  • At lift points 2139 lbs. (970 kg)
  • 24" behind lift point 1676 lbs. (760 kg)
  • Drawbar Type Option
  • ELECTRICAL
  • Alternator 40 amp.
  • Battery voltage x capacity 12 volt, 433 CCA
  • Block heater Optional, CSA approved
  • Engine shut-off Electric key stop
  • Gauges Coolant temperature, fuel level, tachometer, hourmeter
  • Indicator lights Engine oil pressure, electric charge, glow plug indicator
  • Lights 2 front work lights, 2 rear work lights, 2 tail lights, 4 ROPS mounted turn signals / 4-way flashers
  • Optional lights Front work light kit, rear work light kit
  • Horn Optional
  • DIMENSIONS
  • Overall height
  • Top of canopy 89.5 in. (2273 mm)
  • Overall length 198.2 in. (5035 mm) including loader & backhoe
  • Overall width 53.7 in. (1365 mm) / rear axle
  • Tread width
  • Front 35.6 in. (905 mm)
  • Rear 41.3 in. (1050 mm)
  • Wheelbase 62.2 in. (1581 mm)
  • Turning radius
  • With brake 6.6 ft. (2.0 m)
  • Without brake 8.2 ft. (2.5 m)
  • Weight
  • Power unit 4001 lbs. (1815 kg) TLB
  • Angle of departure Backhoe: 20.3
  • TIRES
  • Standard
  • Front 23x8.5-14 R4
  • Rear 12.4x16 R4
  • SAFETY EQUIPMENT
  • ROPS OSHA 1926.1002 / 1926.1003
  • FOPS OSHA 1926.1003
  • Safety switches Standard
  • Operator's presence control (OPC) Standard
  • Engine shut-off Electric key stop
  • Seat belts Standard, retractable
  • Operator's manual storage Behind operator's seat
  • Engine throttle from backhoe position Yes
  • Spark arresting muffler Standard
  • Brakes Wet disc
  • Parking brakes Parking brake on master brake pedal
  • Grab handles for entry / exit Standard
  • Non-slip entry / exit surfaces Standard
  • Lights 2 front work lights, 2 rear work lights, 2 tail lights, 4 ROPS mounted turn signals / 4-way flashers
  • Flashers 4 safety flashers
  • Paint Orange
  • SMV Standard
  • Horn Optional
  • Back-up alarm Optional
  • OPEN PLATFORM FEATURES
  • ROPS Certified OSHA 1926.1002 / 1926.1003
  • FOPS Certified OSHA 1926.1003
  • Platform mount to frame ISO-mounted flat deck
  • Tilt steering wheel Standard
  • Seat type High-back seat
  • Seat swivel Standard
  • Beverage holder Standard
  • OPTIONS Hydraulic breaker KXB310Q
  • LOADER SPECIFICATIONS
  • Loader model TL500
  • Lever control Joystick
  • Boom cylinder
  • Bore 1.97 in. (50.0 mm)
  • Stroke 15.7 in. (399.0 mm)
  • Bucket cylinder
  • Bore 2.17 in. (55.0 mm)
  • Stroke 15.1 in. (382.5 mm)
  • Rated flow 7.0 gpm (26.3 l/min)
  • Net weight (approximate); lbs. (kg) 628 lbs. (285 kg)
  • (A) Max. Lift height to bucket pivot pin
  • Standard 94.5 in. (2400 mm)
  • (C) Clearance with bucket dumped
  • Standard 70.0 in. (1778 mm)
  • (D) Reach at max. Lift height
  • Standard 22.3 in. (567 mm)
  • (E) Max. Dump angle
  • Standard 45
  • LOADER DIMENSIONAL SPECIFICATIONS
  • (F) Reach with bucket on ground
  • Standard 61.5 in. (1561 mm)
  • (G) Bucket roll-back angle
  • At ground level 46
  • (H) Digging depth
  • Standard 7.0 in. (177 mm)
  • Quick attach coupler Skid Steer type
  • Self leveling type Mechanical spill guard
  • LOADER OPERATIONAL SPECIFICATIONS
  • Lift Capacity (Bucket bottom mid point)
  • Standard 1102 lbs. (500 kg) @ max. height
  • (U) Lift Capacity (Bucket pivot pin, max height)
  • Standard 1300 lbs. (590 kg)
  • (Y) Breakout Force (Bucket pivot pin)
  • Standard 2344 lbs. (10417 N)
  • Raising time 3.5 sec.
  • Lowering time 3.1 sec.
  • Bucket dumping time 1.7 sec.
  • Bucket roll-back time 3.0 sec.
  • LOADER BUCKET SPECIFICATIONS
  • Standard bucket
  • Width 60 or 66 in.
  • Standard
  • Capacity - struck 7.8 cu. ft. (0.220 m ) or 11.3 cu. ft. (0.320 m )
  • Capacity - heaped 9.5 cu. ft. (0.270 m ) or 13.8 cu. ft. (0.390 m )
  • Standard bucket
  • Weight 278 lbs. (126 kg) or 328 lbs. (149 kg)
  • BACKHOE SPECIFICATIONS
  • Transport height 89.1 in. (2264 mm)
  • Stabilizer spread transport 53.0 in. (1347 mm)
  • Ground clearance 11.3 in. (287 mm)
  • Overall width 53.7 in. (1365 mm)
  • Maximum digging depth 99.8 in. (2535 mm)
  • Digging depth
  • 2 ft, flat bottom 98.3 in. (2498 mm)
  • 8 ft, flat bottom 77.0 in. (1957 mm)
  • Operating height, fully raised 129.8 in. (3298 mm)
  • Loading height 77.3 in. (1963 mm)
  • Loading reach 52.1 in. (1324 mm)
  • Reach from swing pivot 133.9 in. (3400 mm)
  • Swing pivot to rear axle center line 33.7 in. (855 mm)
  • Bucket rotation 181.2
  • Stabilizer spread-operating 83.3 in. (2116 mm)
  • Angle of departure per SAE: J1234 20.3
  • Leveling angle 10.7
  • Swing arc 180
  • Weight (lbs) 823 lbs. (374 kg)
  • BACKHOE DIGGING FORCE (PER SAE J49)
  • Arm breakout force 3123 lbs. (9444 N)
  • Bucket breakout force 4211 lbs. (18731 N)
  • BACKHOE CYCLE TIME (SECONDS)
  • Boom cylinder
  • Extend 4.1 sec.
  • Retract 3.0 sec.
  • Dipperstick cylinder
  • Extend 4.0 sec.
  • Retract 3.0 sec.
  • Bucket cylinder
  • Extend 3.2 sec.
  • Retract 2.2 sec.
  • Stabilizer cylinder
  • Max. Height to ground 2.5 sec.
  • Ground to max. Height 1.7 sec.
  • Swing cylinder, from 70 degrees to center 1.5 sec. from 90 to center
  • BACKHOE HYDRAULIC CYLINDERS
  • Boom cylinder
  • Rod diameter 1.38 in. (3.5 cm)
  • Cylinder bore 2.95 in. (7.5 cm)
  • Dipperstick cylinder
  • Rod diameter 1.38 in. (3.5 cm)
  • Cylinder bore 2.56 in. (6.5 cm)
  • Bucket cylinder
  • Rod diameter 1.38 in. (3.5 cm)
  • Cylinder bore 2.36 in. (6.0 cm)
  • Stabilizer cylinder
  • Rod diameter 1.57 in. (4.0 cm)
  • Cylinder bore 2.76 in. (7.0 cm)
  • Swing cylinder
  • Rod diameter 1.38 in. (3.5 cm)
  • Cylinder bore 2.36 in. (6.0 cm)
  • BACKHOE BUCKET SPECIFICATIONS
  • Standard
  • Width 12, 18, 24 in. (30.5, 45.7, 61.0 cm)
  • Capacity - struck 0.85, 1.34, 1.87 cu. ft. (0.024, 0.038, 0.053 m )
  • Capacity - heaped 1.10, 1.84, 2.61 cu. ft. (0.031, 0.052, 0.074 m )
  • Weight 84, 92, 106 lbs. (38, 42, 48 kg)
  • None 3, 4, 5 tooth
Add of the above items to my quote request
for a period of   4 hour(s)   day(s)   week(s)  





Also check the following item(s) related to the above:
* Prices are subject to change.

* Please call us for any questions on our backhoe 26hp diesel rentals in Rocky Mount and Wilson NC.
 

Offering quality equipment rentals, tool rentals, contractor supplies, party rentals, event rentals, and party supplies to
the Greenville NC, Raleigh NC, Goldsboro, Tarboro, Rocky Mount, Wilson North Carolina areas

Copyright 2019 RentalHosting.com

Last Update: 7/18/2019 4:28:11 AM