WELDERS
ARC WELDER ON TRAILER
Image for reference only |
|
Daily: $71.00
Weekly: $283.00
Additional Information
- 1 Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
- When welding available auxiliary power will be reduced.
- TECHNICAL SPECIFICATIONS - RANGER 225 ( K2857-1)
- INPUT - GASOLINE ENGINE
- RATED OUTPUT @ 104 F (40 C)- WELDER
- RATED OUTPUT @ 104 F (40 C)- GENERATOR
- Welding Output
- DC Constant Current 225A/25V/40%
- DC Constant Current 210A / 25V / 100%
- DC Constant Voltage 200A / 20V / 100%
- Auxiliary Power 1
- 9,000 Watts Continuous, 60 Hz AC
- 10,500 Watts Peak, 60 Hz AC
- 120/240 Volts
- Make/Model
- Kohler CH23S, CH680, CH730
- Description 2 cylinder, 4 Cycle, Air-Cooled Gasoline Engine
- Aluminum Alloy w/Cast Iron Liners, Electronic IgnitionFuel
- Operating Speed (RPM) High Idle 3700, Low Idle 2200, Full Load 3500
- Displacement cu. in. (cu.cm.) 41.1(674) 44.2(724)
- Capacities
- Fuel: 12 Gal (45.4 L)
- Lubricating Oil: 2.0 Qts. (1.9 L)
- Horsepower 23 HP @ 3600 RPM
- Starting System: Electric Start
- 12VDC Battery Group 58 (435 Cold Cranking Amps)
- RECEPTACLES
- (2) 120VAC Duplex (5-20R)
- (1) 120/240VAC Dual Voltage
- Full KVA (14-50R)
- BATTERY CHARGING CIRCUIT BREAKER
- 20AMP for Engine Battery Charging Circuit
- AUXILIARY POWER CIRCUIT BREAKER
- Two 20AMP for Two Duplex Receptacle
- (1) 40AMP for Dual Voltage (2-pole)
- H x W x D 30.00" x 21.50" x 42.25" 762.0 mm 546.0 mm 1073.0 mm
- MODEL / WEIGHT Codes 11797 and below 514 lbs. (233kg.)
- Code 12093 523 lbs. (237kg.)
- LUBRICATION Full Pressure
- VALVE LIFTERS Hydraulic
- FUEL SYSTEM Mechanical Fuel Pump Additional electric fuel lift pump 5% Regulation on K2382-4.
- GOVERNOR Mechanical Governor
- AIR CLEANER Dual Element
- ENGINE IDLER Automatic Idler
- MUFFLER Low noise Muffler Top outlet can be rotated. Made from long life, aluminized steel.
- ENGINE PROTECTION Shutdown on low oil pressure.
* Prices are subject to change.