WELDERS::
ARC WELDER ON TRAILER

• 1 Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
• When welding available auxiliary power will be reduced.
• TECHNICAL SPECIFICATIONS - RANGER® 225 ( K2857-1)
• INPUT - GASOLINE ENGINE
• RATED OUTPUT @ 104°F (40°C)- WELDER
• RATED OUTPUT @ 104°F (40°C)- GENERATOR
• Welding Output
• DC Constant Current 225A/25V/40%
• DC Constant Current 210A / 25V / 100%
• DC Constant Voltage 200A / 20V / 100%
• Auxiliary Power 1
• 9,000 Watts Continuous, 60 Hz AC
• 10,500 Watts Peak, 60 Hz AC
• 120/240 Volts
• Make/Model
• Kohler CH23S, CH680, CH730
• Description 2 cylinder, 4 Cycle, Air-Cooled Gasoline Engine
• Aluminum Alloy w/Cast Iron Liners, Electronic IgnitionFuel
• Operating Speed (RPM) High Idle 3700, Low Idle 2200, Full Load 3500
• Displacement cu. in. (cu.cm.) 41.1(674) 44.2(724)
• Capacities
• Fuel: 12 Gal (45.4 L)
• Lubricating Oil: 2.0 Qts. (1.9 L)
• Horsepower 23 HP @ 3600 RPM
• Starting System: Electric Start
• 12VDC Battery Group 58 (435 Cold Cranking Amps)
• RECEPTACLES
• (2) 120VAC Duplex (5-20R)
• (1) 120/240VAC Dual Voltage
• Full KVA (14-50R)
• BATTERY CHARGING CIRCUIT BREAKER
• 20AMP for Engine Battery Charging Circuit
• AUXILIARY POWER CIRCUIT BREAKER
• Two 20AMP for Two Duplex Receptacle
• (1) 40AMP for Dual Voltage (2-pole)
• H x W x D 30.00" x 21.50" x 42.25" 762.0 mm 546.0 mm 1073.0 mm
• MODEL / WEIGHT Codes 11797 and below 514 lbs. (233kg.)
• Code 12093 523 lbs. (237kg.)
• LUBRICATION Full Pressure
• VALVE LIFTERS Hydraulic
• FUEL SYSTEM Mechanical Fuel Pump Additional electric fuel lift pump 5% Regulation on K2382-4.
• GOVERNOR Mechanical Governor
• AIR CLEANER Dual Element
• ENGINE IDLER Automatic Idler
• MUFFLER Low noise Muffler Top outlet can be rotated. Made from long life, aluminized steel.
• ENGINE PROTECTION Shutdown on low oil pressure.